DOT 5 Brake Fluid "Will Void Warranty" For more Info Click here
Who is CSSB,inc?
46 Years?
No Warranties Issued on Items Shipped
or Used Outside Of the Continental U.S.A
|
Home Page > BRAKES > 1965-1982 Corvette Brake Caliper Rear Left (Stainless Steel Sleeved w/O-Ring Pistons) GM Licensed
1965-1982 Corvette Brake Caliper Rear Left (Stainless Steel Sleeved w/O-Ring Pistons) GM Licensed
|
|
Free Shipping The Contiguous United States
PART#: CC-O-GM
Free Shipping for Online Orders Only!
OPTIONS:
Add an axle Set of Premium Bonded Brake Pads
|
Finally, New GM Licensed Delco Moraine Corvette Calipers are available. This listing is for 1 left rear caliper (1). No core required. We have been selling these new GM licensed caliper to the big catalog companies for a little over a year now. We put every original detail into making these new calipers. Example- our front calipers have "Arma Steel" cast into the calipers; just as GM did when they manufactured these calipers in 1967. We do not require a core exchange. We take these new GM Licensed caliper castings and bore them out and install stainless steel sleeves; then we assemble them with O-Ring style pistons, stainless steel piston return springs, silver zinc plated bleeder screws, and yellow zinc. brake pad pin. We use new period correct caliper bridge bolts "S" for the "545" castings which are installed on 1967-72 Corvettes. Use only DOT 3 or DOT 4 brake fluid.
Using DOT 5 Brake Fluid Will Void Warranty
Rear Calipers have casting #'s 5452281 inboard & 5452284 outboard. All Castings are Black with some machined areas like OE.
Use only DOT 3 or DOT 4 brake fluid. Do NOT use DOT 5 brake fluid.
Why go with O-Ring Calipers?
Lip seal design seals are used on 1965-1982 Corvette calipers. Lip seals have inherent problems. When they sit for a period of time they leak brake fluid. When they are used on a Corvette with out of spec rotors, spindles, loose bearings or a Corvette that is driven hard; they can actually suck air into the caliper fluid area causing a loss of brake pedal. This problem is called (by GM engineers) "Reverse Air Oscillation".. Because of these problems, GM quit using lip seals in 1982. O-Ring seals virtually eliminate all of these lip seal problems. If GM doesn't use lip seals anymore, why are you? Get the best with our Dr. Vette Calipers!
|
|
|
|