DOT 5 Brake Fluid
"Will Void Warranty"
For more Info Click here
Who is CSSB,inc?
44 Years?
No Warranties Issued on Items Shipped
or Used Outside Of the Continental U.S.A
|
Home Page > BRAKES > 1965-66 Corvette COMPLETE Brake Kit Package (Power) GM Licensed 3/8 x 24
1965-66 Corvette COMPLETE Brake Kit Package (Power) GM Licensed 3/8 x 24
|
|
|
IN STOCK!
PART#: BK-65P38
|
Four (4) Stainless Steel Sleeved Calipers. O-Ring style Pistons which are less prone to leakage. Brand new Master Cylinder for early 1965 Corvette with small brake line ports (3/8 x 24 thread), a complete set of premium GM Licensed brake pads, 4 rubber brake hoses, Copper inlet washers, Pad pins, 2 rear metal caliper lines,
Today's Dr. Vette Gold Series Brake Calipers are the Culmination of Design Process that started in 1979. No other Corvette caliper offers the combination of perfect castings and state of the art components, like our 45 degree parting line O-ring installed on every Dr. Vette O-Ring Piston. Our O-Ring design virtually eliminates the dreaded common leaky caliper syndrome like with the old lip seal design. From the beginning of hand selected castings, through the total renewal of all threads, port holes, facings, to the precision insertion of the smoothest stainless steel sleeve available. the Gold Series O-Ring Type Calipers are a genuine work of art!
EARLY 1965-66 | PART # BK-6566P38
Complete "All the Way"
Power Brake Kit Package
- New GM Delco Moraine Master Cylinder
- Stainless Steel Sleeved, O-Ring Brake Calipers
- GM Licensed Riveted Organic Brake Pads
- Rear Brake Lines
- Front/Rear Brake Hoses
- Hardware Kit
|
|
|
|
|
Only top quality parts in this Complete Power Brake Package for your Early 1965 Corvette. Featuring a brand new 100% Correct Licensed GM Delco Moraine Master Cylinder with Bonus Upgraded Stainless Steel O-Ring Style Piston Calipers. You'll also get brand new rear brake lines, front/rear rubber brake hoses with hardware and a complete set of organic brake pads.
Kit includes:
- Brand New GM Licensed Delco Moraine Master Cylinder
- 4 Disc Brake Calipers (O-Ring, Stainless Steel Sleeved)
- Left & Right Rear Brake Lines with correct factory TBW finish and fittings
- Front & Rear US Made Goodyear Rubber Brake Hoses with Hardware Kit
A little about our Master Cylinder:
100% Factory Correct Mid 1965-1966 Corvette Master Cylinder with Power Brakes. These brand new Licensed Official GM Restoration Parts master cylinders are correct in every way. Manufactured from the original GM blueprints, they have the correct GM Part # 5467005, Correct Casting # 5467084 and factory 7/16" x 24 threads. Even our caps are it, and have the correct amount of yellow haze and the correct markings. We also offer Julian Dating stamping to make it official for an additional $50. These genuine Delco master cylinders are a direct factory replacement for your 1965-66 Corvette with Power Brakes and truly worthy of any restoration. We also now feature the Early 1965 Corvette Master Cylinder.
|
|
|
Year
|
Mid 1965-1966
|
|
Brakes
|
Power
|
|
Condition
|
NEW
|
|
GM Part #
|
5467005
|
|
Casting #
|
5467084
|
|
Brake Line Size
|
1/4"
|
|
Bore Size
|
1"
|
|
Brake Line Inlet Size
|
3/8" x 24 Thread
|
|
Cap
|
Correct Factory Markings
|
|
Weight
|
5 lbs. 13 oz.
|
|
|
|
|
100% CORRECT
|
|
•
|
Reproduced from Factory Original GM Blueprints
|
|
•
|
GM Licensed Restoration Part
|
|
•
|
100% Original Delco Moraine
|
|
•
|
Correct Finish
|
|
•
|
Correct Bore
|
|
•
|
Julian Dating Available
|
|
|
|
|
100% FACTORY CORRECT GM DELCO MORAINE 1965-1966 MASTER CYLINDER
|
|
|
|
|
|
|
|
After 30 years CSSB is excited to finally offer our exclusive Officially GM Licensed Master Cylinders for Mid-Year 1965-66 Corvettes with Power Brakes. Meticulously reproduced from the factory original blueprints, these master cylinders are EXACT in every way including the Delco Mark. Featuring correct embossed GM casting # 5467084, Correct GM Part# 5467005, correct vehicle specific line ports, correct caps, factory finish and more... these are it!
There were 2 master cylinders offered; the Early 1965 Corvette Master Cylinder with small brake line ports (3/8 x 24 thread), and the other being the Mid Year 1965-66 Corvette Master Cylinder which had larger brake line ports (7/16 x 24 thread). The smaller port was usually on early to mid 1965 cars and the larger port was found on both Mid Year 1965-66 cars, we offer both versions!
Don't let us be the judge, ask around and read your judging literature. There have been horrible Illegal reproductions of this master cylinder that were just garbage. We know, we purchased them for resale and were forced to pull them off our product line due to our strict quality standards. So with no other options, we decided to pick this project up and do it right! Since we have been an Official GM Restoration Licensee for years, we requested an Amendment to our existing License to add 1965 & 1966 mid-year Corvette Power Brake Master Cylinders. Now that GM is back on their feet and better than before, we have been given the GREEN Light to produce these Correct Master Cylinders. Even the caps have the correct yellow ting to them making these Power Brake Master Cylinders a real eye catcher and Show Winner.
|
OPTIONS:
* denotes required field
Master Cylinder Options
VIN or BUILD DATE (If opting for Dated Master Cylinder above)
Brake Booster with Correct Part Number and/or Dated
STAINLESS SUPER UPGRADE KIT - Includes complete Stainless Steel Braided Brake Hose Set, 2 Stainless Trailing Arm Lines & 4 Brake Hose "Horseshoe" Clips
ADD A ROTOR SET - Complete Set of 4 (Standard or Slotted & Drilled)
BRAKE LINE KIT - Complete Set | Factory or Stainless
BRASS BRAKE LINE BLOCK KIT (3pc)
CLIP KIT for BRAKE & FUEL LINES - Complete Set
LEFT TRAILING ARM | Complete Rebuilt Exchange (Price Includes Refundable Core Charge)
RIGHT TRAILING ARM | Complete Rebuilt Exchange (Price Includes Refundable Core Charge)
|
|
|
|